Ethylhexyl Salicylate UV Absorber Additive For Adhesives Protects Skin From Light Damage And Premature Ageing

Color:	Clear, Colorless To Slightly Yellowish	Appearance:	White To Light Yellow Powder
Cas:	118-60-5	Flash Point:	256.7°C
Specific Gravity:	1.011-1.016	Melting Point:	103-105°C
Application:	UV Absorber For Plastics, Coatings, And Adhesives	Boiling Point:	500.4°C At 760 MmHg

 

Ethylhexyl Salicylate UV Absorber Additive For Adhesives Protects Skin From Light Damage And Premature Ageing

Product Description:

UV Absorber Additive

UV Absorber Additive is a highly effective and versatile additive that is widely used in the cosmetics industry. It is a white crystalline powder with the CAS number 118-60-5. This product has the ability to absorb both UVB and UVA rays, making it an essential ingredient in sunscreen products.

Product Attributes:

• Assay: UV Absorber Additive has an assay of 95.0-105.0%, ensuring its high quality and effectiveness in providing UV protection.
• Can achieve a high SPF when used with other UV filters: When combined with other UV filters, UV Absorber Additive can achieve a high sun protection factor (SPF) in sunscreen products.
• 2-Ethylhexanol: ≤3000ppm: This product has a low concentration of 2-Ethylhexanol, ensuring low volatility and reducing the risk of skin irritation.
• UVB and UVA absorption: UV Absorber Additive has the ability to absorb both UVB and UVA rays, providing broad-spectrum protection against harmful UV radiation.
• Low volatility: This product has a low evaporation rate, making it suitable for use in sunscreen products that need to provide long-lasting protection.
• Good compatibility with various resins: UV Absorber Additive has good compatibility with various resins, making it suitable for use in a wide range of cosmetic formulations.

Usage and Storage:

UV Absorber Additive should be stored in a cool, dry place away from direct sunlight. It is recommended to use this product within 6 months after opening. This product should be handled with care and proper protective measures should be taken to avoid direct contact with skin and eyes. In case of contact, immediately rinse with plenty of water and seek medical attention if necessary.

Product Specifications:

• Loss On Drying: This product has a Loss On Drying of ≤ 2%, ensuring its stability and effectiveness.
• Flash Point: The Flash Point of UV Absorber Additive is 256.7°C, making it safe to handle and use in cosmetic formulations.
• Melting Point: The Melting Point of this product ranges from 103-105°C, making it suitable for use in various cosmetic formulations.
• CAS Number: UV Absorber Additive has the CAS number 118-60-5, ensuring its quality and authenticity.

Overall, UV Absorber Additive is a highly effective and versatile additive that can provide excellent UV protection when used in sunscreen products. Its high assay, low volatility, and good compatibility make it a desirable ingredient in the cosmetics industry. With proper handling and storage, this product can help enhance the effectiveness of sunscreen products and provide protection against harmful UV rays.

 

Features:

• Product Name: UV Absorber Additive
• Solubility: Insoluble In Water, Soluble In Organic Solvents
• Boiling Point: 500.4°C At 760 MmHg
• Assay: 95.0-105.0%
• Cas: 118-60-5
• Color: Clear, Colorless To Slightly Yellowish
• Key Features:
  • High assay of 95.0-105.0%, ensuring effectiveness in UV protection
  • Suitable for use in sunscreens creams, lotions, and gels
  • Insoluble in water, allowing for long-lasting protection
  • Soluble in organic solvents, making it easily incorporable into various formulations
  • Boiling point of 500.4°C at 760 MmHg, providing stability in high temperature environments
  • Contains ≤3000ppm of 2-Ethylhexanol, meeting safety standards for cosmetic use

 

Technical Parameters:

Properties	Specifications
Product Name	BI UV-EHS
Melting Point	103-105°C
Cas	118-60-5
Boiling Point	500.4°C At 760 MmHg
Assay	95.0-105.0%
Color	Clear, Colorless To Slightly Yellowish
Application	UV Absorber For Plastics, Coatings, And Adhesives
Appearance	White To Light Yellow Powder
Flash Point	256.7°C
Specific Gravity	1.011-1.016
Loss On Drying	≤ 2%
Key Features:
High SPF with Other UV Filters	Can achieve a high SPF when used with other UV filters
High SPF with Other UV Filters	Can achieve a high SPF when used with other UV filters

 

Applications:

UV Absorber Additive

---

Model Number: BI UV-EHS

Place of Origin: China

Minimum Order Quantity: 200kg

Price: Negotiate

Packaging Details: 25kg/drum

Delivery Time: Please contact us

Supply Ability: 10 Tons Per month

Color: Clear, Colorless To Slightly Yellowish

Solubility: Insoluble In Water, Soluble In Organic Solvents

Appearance: White To Light Yellow Powder

Cas: 118-60-5

Boiling Point: 500.4°C At 760 MmHg

---

Product Description:

The BI UV-EHS is a UV absorber additive that is used in various industries for its protective properties. This product is produced in China and has a minimum order quantity of 200kg. The price is negotiable and the packaging is 25kg/drum.

BI UV-EHS is designed to protect skin from light damage and premature ageing. It absorbs UV rays and prevents them from damaging the skin. This makes it an essential ingredient in skincare and cosmetic products.

The UV absorber has high stability and is compatible with various materials, making it suitable for use in different industries. Its solubility in organic solvents makes it easy to incorporate into various formulations.

The appearance of the product is a white to light yellow powder, and it is insoluble in water. It has a boiling point of 500.4°C at 760 MmHg, making it stable and safe to use.

---

Application and Scenarios:

The BI UV-EHS is a versatile product that can be used in various industries, including cosmetics, plastics, and coatings. Its main function is to protect against UV radiation and prevent damage to the skin or materials.

In the cosmetics industry, BI UV-EHS is commonly used in sunscreens, moisturizers, and anti-aging products. It provides protection against both UVA and UVB rays, helping to prevent sunburn and premature ageing of the skin. Its high stability and compatibility with other ingredients make it a popular choice for formulators.

In the plastics industry, BI UV-EHS is used as an additive to protect against UV degradation. It is commonly used in packaging materials, such as bottles and films, to prevent discoloration and deterioration caused by exposure to sunlight. Its insolubility in water also makes it suitable for outdoor applications.

In the coatings industry, BI UV-EHS is used to provide UV protection to various surfaces, including wood, metal, and concrete. It helps to prevent fading, cracking, and other forms of UV damage, making it an essential ingredient in outdoor coatings and paints.

The BI UV-EHS is also suitable for use in other industries, such as textiles, adhesives, and printing inks. Its versatility and protective properties make it a valuable additive for a wide range of products.

---

Conclusion:

The BI UV-EHS is a highly effective UV absorber additive that is produced in China. Its protective properties make it a popular choice in various industries, including cosmetics, plastics, and coatings. With its high stability and compatibility, it is a versatile product that can be used in a wide range of applications. Contact us today to learn more about our product and to place your order.

 

Customization:

UV Absorber Additive Customization Service

Model Number: BI UV-EHS

Place of Origin: China

Minimum Order Quantity: 200kg

Price: Negotiate

Packaging Details: 25kg/drum

Delivery Time: Please contact us

Supply Ability: 10 Tons Per month

Assay: 95.0-105.0%

Application: UV Absorber For Plastics, Coatings, And Adhesives

Melting Point: 103-105°C

Loss On Drying: ≤ 2%

Appearance: White To Light Yellow Powder

Total impurities: ≤2.0%

INCI Name: Ethylhexyl Salicylate

CAS NO.: 118-60-5

 

Packing and Shipping:

Packaging and Shipping Packaging Our UV Absorber Additive is carefully packaged to ensure safe delivery to our customers. We use high-quality materials to prevent any damage during transportation. The packaging is also designed to protect the product from exposure to light and moisture, which can affect its effectiveness. Each container of UV Absorber Additive is labeled with important information, including the product name, batch number, and expiration date. This helps our customers easily identify and track their products. Shipping We offer various shipping options for our customers to choose from. Our standard shipping method is through reputable courier services, which ensures timely and secure delivery of our products. For bulk orders, we also offer ocean freight shipping. Our team works closely with reliable freight forwarders to ensure smooth and efficient transportation of the products. All packages are carefully handled and tracked throughout the shipping process to ensure that they reach our customers in perfect condition. International Shipping

We are proud to offer international shipping for our UV Absorber Additive. Our team is experienced in handling customs clearance and ensuring compliance with all relevant regulations. We take extra care to properly package and label our products for international shipments to avoid any delays or issues. Please note that additional fees and taxes may apply for international shipments, which will be the responsibility of the customer. For more information or specific shipping inquiries, please contact our customer service team. We are happy to assist you with any questions or concerns.

FAQ:

• Q: What is the model number of the UV Absorber Additive? A: The model number of this product is BI UV-EHS.
• Q: Where is this product manufactured? A: This product is made in China.
• Q: What is the minimum order quantity for this product? A: The minimum order quantity is 200kg.
• Q: Is the price of this product negotiable? A: Yes, the price can be negotiated.
• Q: How is this product packaged? A: This product is packaged in 25kg drums.
• Q: What is the delivery time for this product? A: Please contact us for the delivery time.
• Q: How much of this product is available per month? A: We have a supply of 10 tons per month for this product.

Tag:

UV Absorber Additive